Civil Engineering
1 : n / % / ° · 1 : n / % / °
Slope & Elevation Difference Calculator حاسبة الميل وفارق المنسوب
Convert between slope notations used on drawings and site. Enter the horizontal distance and a slope as percentage, ratio 1:n or angle in degrees — get the height difference plus the slope expressed in every other notation. حوّل بين طرق تمثيل الميل المستخدمة في المخططات والموقع. أدخل المسافة الأفقية والميل كنسبة مئوية أو نسبة 1:n أو زاوية بالدرجات — لتحصل على فارق المنسوب والميل بجميع الصيغ الأخرى.
Calculator الحاسبة
Inputs المدخلات
Results (live) النتائج (مباشرة)
dh
—
—
Slope (%)
—
Slope Ratio
—
Angle (°)
—
Actual Slope Length
—
Advertisement · In-content Unit
The Formula Used المعادلة المستخدمة
Δh = L × tan(θ) · Δh = L × i% / 100 · Δh = L / n
Slope length = √(L² + Δh²)
Slope length = √(L² + Δh²)
| L | Horizontal distance between stationsالمسافة الأفقية بين المحطتين |
| Δh | Vertical height differenceفرق المنسوب الرأسي |
| i% | Gradient as percentage = Δh / L × 100نسبة الانحدار المئوية |
| 1 : n | Slope ratio notation (n = L / Δh)صيغة نسبة الميل 1:n |
Typical Engineering Applications التطبيقات الهندسية النموذجية
- 1.Setting out ramp and road gradients from drawings.تنفيذ ميول المنحدرات والطرق من المخططات.
- 2.Drainage slopes for pipes, channels and pavements.ميول الصرف للأنابيب والقنوات والأرصفة.
- 3.Checking handicap access and parking gradients.التحقق من ميول مسارات ذوي الاحتياجات ومواقف السيارات.
- 4.Earthwork height differences between grid stations.فروق المناسيب بين محطات الشبكة في الأعمال الترابية.
Common Calculation Mistakes الأخطاء الشائعة في الحساب
- ✗Confusing horizontal distance with slope distance.الخلط بين المسافة الأفقية ومسافة الميل المائلة.
- ✗Entering 2 for 1:2 ratio — the input is n, and 1:2 means 50%.إدخال 2 لنسبة 1:2 — الإدخال هو قيمة n، و 1:2 تعني 50%.
- ✗Using percent where the drawing shows degrees (2% ≈ 1.15°).استخدام النسبة المئوية والرسم يظهر بالدرجات (2% ≈ 1.15°).
- ✗Rounding very flat slopes to zero — drainage needs ≥ 1%.تقريب الميول شبه المسطحة إلى صفر — الصرف يحتاج ≥ 1%.